Best Estimating App for Roofing Contractors: 10 Top Picks for 2026

How we scored each best estimating app for roofing contractors

SimplyWise Cost Estimator is the best estimating app for roofing contractors who quote on site. We scored ten tools on speed, free trial value, mobile use, pricing, and roofing fit.

Squares and pitch decide the roof price

Material quotes and carrier scopes speak in squares. One square is 100 sq ft of roof surface. But you measure the footprint, and pitch makes the roof longer. For example, a 6/12 roof carries 1.118 times its footprint, so 2,000 sq ft becomes 22.4 squares.

Then add waste to the squares, not the price. Also give ridge, drip edge, and ice and water their own rows.

Run it yourself. Turn a photo into an itemized estimate in about 6 seconds. Free to try.

The adjuster reads line items, not totals

Insurance work turns your estimate into a negotiating document. You cannot supplement a lump sum. Ridge vent, drip edge, ice and water, and starter each need a row with a quantity. So do steep and two story charges.

Labor prices by the crew day, not the shingle

Tear off and dry in is a day of exposure, not a per square rate. Your square price has to clear the crew’s wage first. Step 3 below shows the floor.

Pitch factor: how a roofing estimating app gets from footprint to roof area

The pitch factor turns the footprint into roof area. It is the square root of 1 plus the rise over run, squared. Here is what it does to a 2,000 sq ft footprint.

The same house at 4/12 and at 12/12 differs by more than 7 squares. So guessing pitch from the curb costs money. Steep charges get their own line.

A worked takeoff in a roofing estimating app: a 6/12 tear off and reroof

One sample job: a simple gable, 2,000 sq ft footprint, 6/12, one layer to strip. It is not a price list. Run the same job through each app on your shortlist and compare.

1. Step 1: apply the pitch factor

   Multiply the 2,000 sq ft footprint by 1.118 for 6/12. That is 2,236 sq ft of roof surface, or 22.4 squares.

2. Step 2: add waste to the squares

   Ten percent on a simple gable takes 22.4 squares to 24.6. So order 25, and show it as a quantity.

3. Step 3: price the crew day off a wage floor

   BLS put the mean hourly wage for roofers at $27.95 in May 2025. Four people for a ten hour tear off day is $1,118 in raw wage. Burden, disposal, equipment, overhead, and profit stack on top.

4. Step 4: split the accessories out now

   Ridge vent and drip edge by the lineal foot. Ice and water at the eaves by the roll. Starter by the bundle. Split them before you send.

Four numbers, one walkthrough. Turn a photo into an itemized estimate in about 6 seconds, then edit the squares before you send. Free to try.

Best estimating app for roofing contractors, side by side

Prices read in October 2026. See SimplyWise vs Jobber and how to estimate a roofing job.

The best estimating app for roofing contractors, ranked 1 to 10

Prices re-verified live 2026-10-09.

1. SimplyWise Cost Estimator

   Best overall for a repair and reroof shop that quotes in the driveway. Photograph the roof or the damaged slope. You get an itemized estimate in about 6 seconds, with material quantities. Every line is editable. The client signs a branded quote. It has no aerial measurement. Every line carries unit, quantity, and price, so you can retype 25 squares on the spot. On a Pro iPhone, a LiDAR room scan captures measurements.

   Pricing. $29.99/mo or $239.99/yr, about $20/mo on annual, with a 7-day free trial.

2. AccuLynx

   Fits a roofing company that runs a full office. Pipeline and production sit in one system. But it is built for multi crew companies, not a one truck shop.

   It adds documents, texting, payments, and crew management around the estimate.

   Pricing. Not published. The pricing page is a request form.

3. Roofr

   Best for ordering reports at the entry tier. Starter prices reports at $19 each. Measure+ drops them to $13 and adds waste calculations.

   Starter reports arrive in 24 hours or less, with 1 basic job board. Higher CRM tiers add proposals, payments, and signable contracts.

   Pricing. Starter is $0 a month. Measure+ runs $109 to $169 monthly.

4. JobNimbus

   A roofing CRM for a mid size crew. Estimates, payments, and measurements run in one workflow.

   Invoicing, financing, and supplier ordering sit in the same workflow. SumoQuote sits inside it for signable proposals.

   Pricing. No list price. Essentials covers up to 3 users, with a 14 day free trial.

5. RoofSnap

   Best for sketching a roof yourself or ordering a report. It suits a repair heavy shop.

   Sketch a simple roof in the app, or order a report. Then build good, better, best estimates and contracts. It fits a shop that does not want a report on every call.

   Pricing. Pay as you go from $13 per measurement order. Monthly starts at $105 per user.

6. EagleView

   Aerial measurement for storm and insurance work. It is not a full estimating app. The report returns squares, pitch by facet, and hip, ridge, and valley detail.

   It is the measurement layer that many platforms and carriers plug into. You still need an app to price the job.

   Pricing. Per report. A small residential report up to 20 squares runs $32.75 on Bronze.

7. Hover

   Best for measurements from phone photos. Guided photos return a 3D model.

   A rep or the homeowner shoots guided photos. The model carries roof, siding, fascia, and window measurements, and feeds estimating tools. It measures; it does not price the job.

   Pricing. The first 3 projects cost nothing. A roof only report then runs $29 to $69.

8. Leap

   Best for the in home close. Leap SalesPro builds a branded presentation with remote signature.

   It is built for a company that sells at the kitchen table, with financing in the presentation. Leap CRM runs the workflow behind it.

   Pricing. Leap CRM Essential runs $79 a month for one user, with a 14 day free trial.

9. QuoteIQ

   Best for satellite measuring and the office in one login. MapMeasure Pro traces roof planes and pitch from satellite imagery. It also drafts a quote from a roof photo, using IQ Credits. Each generated estimate draws on a monthly credit allowance, and unused credits do not roll over. Pick QuoteIQ for measuring plus scheduling. Pick SimplyWise for the photo quote in about 6 seconds.

   Pricing. Essentials is $29.99 a month for 1 user. Measuring starts on Beginner at $99.99 a month. 14 day trial.

10. Estimate Rocket

    Best multi trade platform when roofing is only part of the mix. Proposals and QuickBooks sync cover several trades.

    It covers roofing, painting, and remodeling. Seats come bundled by tier, which fits an office with several estimators.

    Pricing. Launch runs $139 a month with 3 full users.

Where each best estimating app for roofing contractors fits