# Tile Contractor Pricing Guide

Canonical URL: https://www.simplywise.com/blog/tile-contractor-pricing-guide/
Plain text: https://www.simplywise.com/blog/tile-contractor-pricing-guide/llms.txt
Publisher: SimplyWise, Inc. (https://www.simplywise.com)
Published: September 2, 2026
Updated: October 5, 2026
Category: Project Cost Guides
Summary: Tile contractor pricing, start to finish: the wage floor, the loaded hour, substrate prep, layout complexity, and the silica rule that costs real money.

---

## Tile Contractor Pricing: Build a Rate That Holds Up

Tile contractor pricing starts at the wage floor and the substrate, not at a square foot number.

At a glance

1. Tile contractor pricing starts at the wage floor: $54,390 a year, $26.15 an hour, median, May 2025.
2. Tile and stone setters ran a median of $55,690 a year inside that group.
3. Your billing rate is not that wage. Taxes, insurance, and the truck ride along.
4. Substrate prep gets its own line. A flat square foot price buries it.
5. Layout complexity drives the hours, so count cuts, not square feet.
6. Cutting tile triggers OSHA silica controls, and the water kit is real cost.

## Tile contractor pricing starts at the wage floor

Tile contractor pricing has a floor: what the work pays. Median pay for flooring installers and tile and stone setters was $54,390 a year in May 2025. That is $26.15 an hour, per the U.S. Bureau of Labor Statistics. The lowest 10 percent earned less than $36,910, and the highest 10 percent more than $89,320.

Inside that group, the detailed occupations do not pay alike.

| Occupation | Median wage, May 2025 | Jobs, 2025 |
| --- | --- | --- |
| Floor layers (except carpet, wood, hard tile) | $56,460 | 29,800 |
| Tile and stone setters | $55,690 | 45,200 |
| Floor sanders and finishers | $50,440 | 4,700 |
| Carpet installers | $50,340 | 17,400 |

So a tile setter sits second among the flooring trades. Still, the billing rate is never the wage. Payroll taxes, workers comp, liability, the truck, and unbilled time all ride on the billable hour. That spread is labor burden (https://www.simplywise.com/blog/what-is-labor-burden-in-construction/). A copied square foot number leaves it out.

## Substrate prep is the line a flat square foot price hides

BLS describes the work plainly. Installing floors and tiles requires a smooth, even base of mortar or plywood. On remodels, crews may first have to remove old flooring and smooth the surface.

Prep is not a favor you throw in. It is demolition, haul off, flattening, and any waterproofing the assembly calls for. On a remodel you cannot see it until the old floor comes up.

So quote prep as its own line. If the substrate is still buried, price it as an allowance with a stated unit rate. One blended square foot number prices the tile and eats the prep.

## Layout complexity is what breaks the rest of a flat rate

BLS also describes the sequence. Tile installers cut tiles using wet saws, tile scribes, or handheld tile cutters. Then they spread mortar or mastic with trowels before setting the tile. Finishers grout after that.

Every one of those steps scales with cut count, not with floor area. A running bond field is not a herringbone with a niche and a curb. Meanwhile the pace has a ceiling, because the work means steady reaching, bending, and kneeling.

So price the layout. Count cuts, inside corners, niches, curbs, and transitions. That is the part of tile contractor pricing a square foot number cannot carry.

## Get the rate onto the page fast

The rate is set. Typing the estimate by hand is the slow part. SimplyWise Cost Estimator turns a photo into an itemized, branded estimate in about 6 seconds. In addition, every line carries a unit, quantity, and price per unit. Pricing is $29.99/mo or $239.99/yr, about $20/mo on annual, with a 7-day free trial.

## Silica control is a cost line, not a formality

OSHA’s silica standard for construction is 29 CFR 1926.1153. It covers all occupational exposures to respirable crystalline silica in construction work. The only carve out is exposure below 25 micrograms per cubic meter, as an 8 hour average. Cutting tile, stone, and mortar puts a setter inside it.

Table 1 lists each task, its engineering control, and the required respiratory protection. The respirator side runs in two duration columns: at or under 4 hours a shift, and more than 4 hours. Two saw rows matter here.

For stationary masonry saws, the control is an integrated water delivery system that continuously feeds water to the blade. Required respiratory protection in both columns: none.

For handheld power saws of any blade diameter, the control is that same water feed. But the respirator column then splits by where you cut. Used outdoors, none at or under 4 hours and APF 10 above that. Used indoors or in an enclosed area, APF 10 in both columns.

Read that as a pricing rule. A stationary wet saw fed with water carries no respirator obligation. The same crew cutting handheld inside a closed bathroom owes APF 10 respirators from hour one.

The standard also requires a written exposure control plan, reviewed at least annually. Name a competent person to inspect job sites and equipment. That is overhead, so it belongs inside the loaded hour.

## Build your tile contractor pricing in this order

1. Start at the loaded hour Take the wage you pay, then add taxes, insurance, the truck, and unbilled time. Divide by the hours you can truly bill.
2. Price prep as its own line Quote demolition, flattening, and waterproofing separately, after you see the substrate. On a remodel, state an allowance with a unit rate.
3. Price the layout, not the area Count cuts, niches, curbs, and thresholds. A pattern carries more hours per square foot than a straight field.
4. Apply margin last Margin goes on after labor, prep, material, and dust control. Applied earlier it hides a cost you forgot.

## Keep reading

- How to Estimate a Tile Installation (https://www.simplywise.com/blog/how-to-estimate-tile-installation/)
- Tile Material Calculator (https://www.simplywise.com/blog/tile-material-calculator-sq-ft-to-boxes/)
- Electrical Contractor Pricing Guide (https://www.simplywise.com/blog/electrical-contractor-pricing-guide/)

## Sources

- BLS Occupational Employment and Wage Statistics, May 2025 (https://www.bls.gov/news.release/ocwage.htm) (group and detailed occupation medians and percentiles; released May 15, 2026, verified 2026-08-24).
- BLS, Occupational Outlook Handbook: Flooring Installers and Tile and Stone Setters (https://www.bls.gov/ooh/construction-and-extraction/tile-and-marble-setters.htm) (job duties and work environment; verified 2026-08-24).
- BLS Employment Projections, 2025 to 2035 (https://www.bls.gov/news.release/ecopro.nr0.htm) (detailed occupation employment, 2025 base year; released August 27, 2026, verified 2026-08-31).
- OSHA, 29 CFR 1926.1153 Respirable Crystalline Silica (https://www.osha.gov/laws-regs/regulations/standardnumber/1926/1926.1153) (Table 1 saw rows and the written exposure control plan; verified 2026-08-21).
- OSHA, Crystalline Silica in Construction (https://www.osha.gov/silica-crystalline/construction) (scope of the construction standard; verified 2026-08-21).
- SimplyWise Cost Estimator, App Store (https://apps.apple.com/us/app/simplywise-cost-estimator/id6670619664) (4.8 rating; verified 2026-08-21).

## Tile contractor pricing: common questions

**What should tile contractor pricing be based on?**

Your loaded cost per billable hour, not the wage. Median pay for flooring installers and tile and stone setters was $26.15 an hour in May 2025 per BLS.

**Should I quote tile by the square foot?**

Only for the field. A blended square foot price buries substrate prep and cut count.

**How do I price substrate prep on a remodel?**

Quote it as an allowance with a stated unit rate. The old floor hides the base until it comes up.

**Does layout complexity really change the price?**

Yes. Cutting, setting, and grouting all scale with cut count. A herringbone carries more hours per square foot than a straight field.

**Do OSHA silica rules apply to cutting tile?**

Yes. Table 1 of 29 CFR 1926.1153 covers handheld power saws of any blade diameter. The control is an integrated water delivery system. Indoors or in an enclosed area, it also requires APF 10 respirators in both duration columns.

**Can SimplyWise price a tile job from a photo?**

Yes. SimplyWise Cost Estimator turns a photo into an itemized, branded estimate in about 6 seconds. Free to try, at $29.99/mo or $239.99/yr.

---

## About SimplyWise

SimplyWise, Inc. (New York, NY) builds mobile apps for contractors, tradespeople, and small business owners. The SimplyWise Cost Estimator turns a job site photo into an itemized estimate with labor and material costs in about 6 seconds, and the client signs the branded quote to approve it. It is rated 4.8 on the App Store. It is free to try with a 7-day free trial, then $29.99 per month or $239.99 per year (about $20 per month on the annual plan), and one subscription includes every app in the SimplyWise suite.

- Download: https://www.simplywise.com/download
- App Store: https://apps.apple.com/us/app/simplywise-cost-estimator/id6670619664
- Google Play: https://play.google.com/store/apps/details?id=com.simplywise.costestimator
- Every SimplyWise page as plain text: https://www.simplywise.com/blog/llms.txt