Hardscape Pricing Guide for Contractors (2026)

Hardscaping · Pricing Guide

Hardscape Pricing Guide for Contractors

Hardscape pricing, feature by feature: per square foot bands, plus the base, drainage and labor lines that decide the margin.

Measuring the patio is the slow part. Turn a photo into an itemized estimate in about 6 seconds.

★★★★★ 4.8 on the App Store
SimplyWise

Updated August 12, 2026

5 min read
Circular paver patio set inside a stacked stone border in a landscaped yard

How hardscape pricing works

Hardscaping sits inside a $176.7 billion landscaping services market, on IBISWorld’s 2026 count. About 556,000 businesses share it, mostly small crews pricing off a clipboard.

Almost every line scales with the finished surface. Square footage drives paver count, base volume, sand volume and crew hours. Measure the footprint first and wall faces separately, because a wall prices by face area. Small patios land higher per foot; fixed costs spread across fewer feet.

Hardscape pricing by feature

These bands cover installed cost in typical conditions: material, labor and a standard base at one finish level. They synthesize published contractor cost guidance rather than one dataset. Confirm every figure locally before it goes on a bid. A poured slab prices differently, as our cost to pour a concrete driveway guide shows.

Feature Installed range Priced by Main cost drivers
Paver patio, concrete pavers $15 to $40per sq ft Finished surface area Paver tier, pattern, base depth
Walkway, pavers $15 to $35per sq ft Finished surface area Width, curves, edge restraint
Driveway, pavers $20 to $50per sq ft Finished surface area Thicker base for vehicle load
Retaining wall, segmental block $25 to $60per sq ft Wall face area Height, drainage, geogrid, footing
Natural stone patio or walkway $30 to $70per sq ft Finished surface area Stone type, hand fitting
Fire pit, built in masonry $700 to $4,000per unit Per unit Block or stone, gas line

Regional labor rates that move a bid

Labor is the biggest swing in a hardscape estimate, and it moves by market. The table carries median hourly wages for landscaping and grounds workers in six metros. The national median is $18.82 an hour, and the index column is our arithmetic against it.

Metro area Region Median hourly wage Index vs national
Boston-Cambridge-Newton, MA-NH Northeast $23.57 1.25x
New York-Newark-Jersey City, NY-NJ Northeast $21.89 1.16x
Chicago-Naperville-Elgin, IL-IN Midwest $21.77 1.16x
Los Angeles-Long Beach-Anaheim, CA West $21.46 1.14x
Atlanta-Sandy Springs-Roswell, GA South $18.51 0.98x
Dallas-Fort Worth-Arlington, TX South $18.12 0.96x

Source: O*NET OnLine local wages for landscaping and groundskeeping workers, code 37-3011, carrying 2025 Bureau of Labor Statistics wage data. Verified live 2026-08-08. Add your own loaded multiplier for payroll taxes, insurance, the truck, fuel and machine time.

Standing in the yard with a tape measure? SimplyWise Cost Estimator turns a photo into an itemized estimate in about 6 seconds. Free to try.

The base decides whether it lasts

Crews build a base in three layers. First they excavate: 7 to 10 inches under a patio or walkway, 10 to 14 under a driveway. Then they compact a dense graded gravel sub base. Foot traffic needs 4 to 6 inches, vehicles 8 to 12. Last they screed an inch of coarse sand or screenings.

Haul off and dump fees belong on the estimate when spoil leaves. Gravel prices by the ton, so depth drives volume as hard as area. Underbidding it turns a profitable patio into a warranty callback.

Drainage is a line item, not a nicety

Pitch a patio away from the house, roughly a quarter inch per foot. Where low spots hold water, route a drain to daylight. Behind a retaining wall, drainage turns structural. Gravel backfill and a base pipe relieve the pressure that pushes a wall over. Walls over about 4 feet usually trigger a permit.

Waste is a line, not a rounding habit. Add 5 to 10 percent on a plain rectangle. Curves and herringbone want 10 to 15 percent, irregular stone 15 to 25. Order exact area on a cut heavy pattern and the crew runs short.

A 300 square foot paver patio

Take 300 square feet of standard concrete pavers in a running bond pattern. The base runs about 8 inches of excavation. On top go a gravel sub base and a 1 inch leveling course.

Materials run pavers plus a 5 to 10 percent waste allowance, gravel, sand, edge restraint and jointing sand. At the $15 to $40 band, that patio lands roughly between $4,500 and $12,000 installed.

Crews bidding past hardscape can compare tools in our best estimating app for landscaping roundup.

Send the number before you leave the driveway

SimplyWise Cost Estimator turns a photo into an itemized estimate in about 6 seconds, with material quantities on the line items. Pricing is $29.99/mo or $239.99/yr, about $20/mo on annual, with a 7-day free trial.

SimplyWise Cost Estimator

Sources

Hardscape bids lose money underground, in the base nobody sees, not in the pavers the customer points at.SimplyWise Editorial

Hardscape pricing: common questions

How do hardscapers price a job?

Patios, walkways and driveways price per square foot. Retaining walls price by wall face area; fire pits price per unit. Base, drainage, materials, loaded labor, waste, overhead and profit each get their own line.

How much does a paver patio cost per square foot?

As general guidance, a concrete paver patio commonly runs $15 to $40 per square foot installed. That band covers material, labor and a standard base, and curves, premium pavers or poor access push it higher.

How deep should the base be under pavers?

Crews excavate 7 to 10 inches under a patio or walkway. On top go a 4 to 6 inch gravel sub base and a 1 inch leveling course. A driveway runs deeper, often 10 to 14 inches.

Does a retaining wall need drainage?

Yes. Free draining gravel backfill and a perforated pipe at the base relieve the pressure that pushes a wall over. Walls over about 4 feet usually add geogrid, an engineered footing and a permit.

How much does hardscape labor cost by region?

Median hourly pay for landscaping and grounds workers runs $23.57 in Boston, $21.89 in New York and $21.77 in Chicago. Los Angeles sits at $21.46, Atlanta at $18.51 and Dallas at $18.12, against a national median of $18.82.

How much does SimplyWise Cost Estimator cost?

SimplyWise Cost Estimator is $29.99/mo or $239.99/yr, about $20/mo on annual, with a 7-day free trial. It turns a photo into an itemized estimate in about 6 seconds, with material quantities on the line items.

Quote on the spot

Turn this guide into an on-site quote.

Snap a photo of the patio area, wall face or walkway run. Get an itemized estimate in about 6 seconds, then hand over a professional, branded quote the client signs to approve. Free to try.

SimplyWise Cost Estimator