How to Estimate a Concrete Patio: Yards and Labor

Concrete · How to Estimate

How to Estimate a Concrete Patio: Yards and Labor

How to estimate a concrete patio: measure the pad, turn inches into cubic yards, add a waste allowance, then price forms, finish and labor on separate lines.

Try SimplyWise Cost Estimator freeFree to try. Turn a photo into an itemized estimate in about 6 seconds.
★★★★★ 4.8 rating on the App Store (checked November 16, 2026)
SimplyWise

Updated November 16, 2026

5 min read

Add SimplyWise as a preferred source

Crew screeding fresh concrete for a slab outside a house
Photo: 176th Wing Alaska Air National Guard from Anchorage, Alaska, United States, CC BY 2.0, via Wikimedia Commons

How do you measure the patio pad?

Measure the longest length and the widest width in feet. Write down the thickness in inches. A rectangle is length times width. Split an L shape or a curve into rectangles, then add them up.

Measure twice, because one wrong foot repeats in every line after it. A phone helps on odd shapes, so see how to measure square footage with a phone. Note where the slab meets the house, since that edge sets the slope and the form height.

How to estimate a concrete patio in cubic yards

Concrete sells by the cubic yard. Divide the thickness in inches by 12 to get feet. Multiply length, width and thickness. Divide by 27, since a cubic yard holds 27 cubic feet. Then add your waste allowance for uneven subgrade and spillage.

Worked example: a 16 by 12 foot patio, 4 inches thick. That is 192 square feet. Four inches is one third of a foot, so 192 divided by 3 is 64 cubic feet. Divide by 27 for 2.37 cubic yards. Add 10 percent and order about 2.61 yards.

Thickness comes from the plans and local code. Here is the same 192 square foot pad at three thicknesses. Use the concrete slab cost calculator or the cubic yard calculators to check your math.

Thickness Cubic yards With 10 percent waste
4 inches 2.37 2.61
5 inches 2.96 3.26
6 inches 3.56 3.91

What do forms, base and finish add?

Yardage is only the concrete. List the rest as separate lines. Count the linear feet of form boards around the edge. Add stakes, release agent and the base material under the slab. Add wire mesh or rebar if the plans call for it.

Then add expansion joints, control cuts, sealer and the finish, such as broom or stamp. Get each price from your supplier this week, because material prices move. This guide quotes no price per yard on purpose. For local totals, see concrete patio cost and concrete cost per yard.

How do you estimate concrete patio labor?

Labor is hours times a wage. Cement masons and concrete finishers earned a $27.41 median hourly wage nationally (BLS OEWS, May 2025, code 47-2051). That covers employees, not self-employed contractors. It also leaves out payroll tax, insurance and overhead.

Here is a worked example of the method, not a rate to quote. A two-person crew needs one full day, or 16 labor hours. Sixteen hours times $27.41 is $438.56 in wages before payroll costs.

Count hours for forming, placing, screeding, floating, finishing, curing and cleanup. Add time for tight access. Your own logged hours beat any table, so time every pour.

Turn a patio photo into an itemized estimate, free →

How to estimate a concrete patio: the order that holds up

  1. Measure the pad.

    Get length, width and thickness. Split odd shapes into rectangles.

  2. Convert to cubic yards.

    Multiply the three sizes in feet, divide by 27, then add waste.

  3. Price forms, base and finish.

    Give each material its own line with a quantity, a unit and a price.

  4. Price the labor.

    Multiply hours by the wage, then add payroll costs, insurance and overhead.

  5. Present the quote.

    List every line and name what is not included, such as demolition, grading and permits.

SimplyWise Cost Estimator for patio quotes

SimplyWise Cost Estimator turns a job-site photo into an itemized estimate in about 6 seconds. Material, labor and fee lines stay editable, each with its own unit, quantity and price per unit. Check the yards against your own measurements, then send a branded quote the client signs to approve. It is $29.99 a month or $239.99 a year (about $20 a month on annual), with a 7-day free trial.

Try SimplyWise Cost Estimator free

Crews that pour often can read more in the concrete flatwork estimate app guide, or the full method in how to estimate concrete work.

Keep reading

Sources

Wages

Method

  • Worked examples are arithmetic from the stated inputs. The 10 percent waste allowance is an example, not a standard.

Product

Frequently asked questions about how to estimate a concrete patio

How much concrete do I need for a patio?

Multiply length, width and thickness in feet, then divide by 27 for cubic yards. A 16 by 12 foot patio at 4 inches needs about 2.37 yards, or 2.61 with 10 percent waste.

How thick should a concrete patio be?

Thickness comes from the plans, the soil and local code, so check them before you price. Each extra inch on a 192 square foot pad adds about 0.59 cubic yards.

How do you estimate concrete patio labor?

Count hours by task, then multiply by the wage. Cement masons earned a $27.41 median hourly wage in May 2025 (BLS OEWS), before payroll costs, insurance and overhead.

Can I estimate a concrete patio from a photo?

Yes, for a first quote. SimplyWise Cost Estimator turns a photo into an itemized estimate in about 6 seconds. Tape the pad once for exact quantities, and every line stays editable.

Measure it, price it, quote it

Quote the next patio with every line listed.

Snap a photo and get an itemized estimate with editable lines. Free to try, then $29.99 a month or $239.99 a year after a 7-day trial.

Try SimplyWise Cost Estimator free